 |
 |
| Rock Drills |
|
|
| Rock Drills |
| pneumatic anchor rod installer |
 |
 |
||
Applications |
|||
| Scope of application Pneumatic anchor rod installer is a device used for tightening or loosening screw connection It is an important device transferring manual work to mechanization in assembly operation It is also widely used in mine,automobile,tractor,motor-mechanical,brige,ship,locomotive,construction work,etc.The installer can not only improve the productivity,significantly,but also can reduce workerls labor intensity dramatically. Is applicabie with M24-M30¡¢M16-M30 screw. |
|||
| Performance parameters | Accessories | ||
| Main performance parameters | AQS 10/13 | AQS 11/13 |  |
| Air pressure | 0.4-0.8MPa | 0.4-0.8MPa | |
| Non-loading rotation speed | 5500r/min | 5500r/min | |
| Air consumption with load | 40L/S | 40L/S | |
| Twisting torque | 2600Nm/5s | 3200Nm/5s | |
| Apothem | 42MM | 42MM | |
| Turning shaft square | 19x19MM | 22x22MM | |
| Inner-diameter of rubber tube | 19MM | 19MM | |
| weight | 8kg | 7.5kg | |
| Long casing with dowel 900A | short casing without dowel 900B | ||
 |
 |
||
| Performance parameters | |||
Main performance parameters |
AQS 900A |
AQS 900B |
|
Air pressure |
0.4-0.8MPa |
0.4-0.7MPa |
|
Non-loading rotation speed |
4500r/min |
5500r/min |
|
Air consumption with load |
35L/S |
40L/S |
|
Twisting torque |
2600Nm/5s |
3200Nm/5s |
|
Turning shaft square |
19x19MM |
22*22MM |
|
Inner-diameter of rubber tube |
19MM |
19MM |
|
weight |
13kg |
12kg |
|
| Handle/Air pneumatic Snchor bolt Installer 900C | |||
 |
Parts 1 |
 |
|
Parts 2 |
 |
||
 |